Sand and dust testing
At our Warwick site, TRaC has a purpose built facility for the simulation of sand and dust conditions that may be experienced by a component. This includes that capability to simulate driving / blowing sand or dust with a calibrated zone of 200mm diameter in which a component would experience the full effects of the driving / blowing sand or dust.
This test facility has recently undergone an extensive refurbishment to meet the demanding <30% RH specified within the MIL STD 810 requirements. Unlike conventional blowing / driving sand and dust chambers, where full compliance is restricted due to ambient humidity conditions, blowing / driving sand and dust testing at TRaC is available all year round.
Our performance capabilities are as follows:
| Max Working Space (m) | Temperature Range (°C) | Dust Concentration (g/m3) | Maximum Velocity (m/s) |
|---|---|---|---|
| 1.5 x 1.5 x 2.5 | +20 to +70 | 0.1 to 20 | 40 |
The sand and dust used by TRaC for this environmental testing is certified to industry standards for both composition and particle size.
Our accreditation for sand and dust testing includes to DEF STAN 00-35, DEF STAN 07-55, MIL STD 810 and RCTA DO 160 standards.
